Suspension
Fork lower leg/ shock air can service — from $65 (per unit)
Complete fork/ shock (150-200hr) service — from $160 (per unit)
Dropper seat post service - from $50
Fork/Shock Install - from $20 (per unit)
Fork/Shock Removal & Install - from $30 (per unit)
Dropper Seat Post Install
(mechanical, external) - $30 (hydraulic or internal) - $45
Steerer tube Cutting - $25 standard - $45 carbon
Prices are for labour only, parts, seals and oil are additional.


Brakes
Brake Service & Bleed - $35 (per brake)
Flush through new fluid and brake bleed, caliper piston clean and lubrication, visual inspection of rotor and brake pads
Brake Install & Bleed - $50 front & $70 rear
Install new brake, cut hose to size, bleed brake, align brake pads/rotor
Brake Lever or Caliper Replacement/Install - $45 (per brake)
Remove old lever (if applicable), install lever, bleed brake, align brake pads/rotor
Brake adjust/align - $15 (per brake)

Reset pistons & align brake pads/rotor
Brake Pads Install - $15 (per brake)
Reset pistons, install new brake pads, align brake pads/rotor
Rotor Install - $7.5 (per brake)
Brake Inner Cable Install & Setup - from $20 (per brake)
Install inner cable and adjust/align brakes
Prices are for labour only, parts and oil are additional.

Wheels
Spoke Tension Check - from $35 (per wheel)
Check spoke tension and minor wheel true
Spoke Replacement - from $45 (per wheel)
Replace up to 3 broken spokes and true wheel
Wheel Builds - from $150 (per wheel)
Prices are for labour only, parts are additional.

Bearings
Complete Full Suspension Bike Bearing Service - from $150
Comprehensive inspection and service of all primary bearings and bushings on the bike.

Bearings are removed where applicable, cleaned, inspected, and re-greased, with correct reinstallation torque.
Includes:
Headset
Bottom bracket
Wheel & freehub bearings
Frame pivot and linkage bearings & bushings

Advice provided on bearing condition and replacement if required.
Complete Hardtail/Road Bike Bearing Service - from $99
Same service as complete full suspension bike bearing service excluding frame pivot/linkage bearings.

Wheel bearing service - from $35
Bearings are removed where applicable, cleaned, inspected, and re-greased, with correct reinstallation torque.
Freehub Service - from $20
Bearings and ratchets are removed where applicable, cleaned, inspected, and re-greased, with correct reinstallation torque.
Wheelset service - from $80
Bearings and ratchets are removed where applicable, cleaned, inspected, and re-greased, with correct reinstallation torque.

Standard Headset Service - $25
Integrated Headset Service - $35
Bearings are removed where applicable, cleaned, inspected, and re-greased, with correct reinstallation torque.
Bottom Bracket Service - from $35
Bearings are removed where applicable, cleaned, inspected, and re-greased, with correct reinstallation torque.
Frame pivot & Linkage Service - from $65
Bearings and bushings are removed where applicable, cleaned, inspected, and re-greased, with correct reinstallation torque.
Bearing and bushing replacement available — quoted separately.


Drivetrain
Gear tune - from $15 (per derailleur)
Set limit screws, b-tension and get gears running smoothly
Replace chain - from $10
Size and fit new chain to bike (recommend to add gear tune)
Install Chainring or Crankset - from $20
Install Cassette - from $15
Install cassette with correct installation torque
Install Shifter & Gear Tune- from $30 (per shifter)
Install Derailleur & Gear Tune - from $35 (per derailleur)
Gear Inner Cable Install & Setup - $20
Install inner cable and gear tune

Rear Derailleur Full Service - from $55
Full strip down, clean, inspection, and re-grease of the derailleur.
Includes:
Clutch
Jockey wheels
Mounting bolt
b-tension mount
Rear Derailleur Clutch Service - $40
Full strip down, clean, inspection, and re-grease
Jockey Wheel Service - $20
Full strip down, clean, inspection, and re-grease

General
Outer Gear/Brake Housing Install - $15 external / $35 internal
Drivetrain Clean & Degrease - $25


Cockpit
Install Handlebars - from $25
Install Stem - from $7.5
Wrap Bartape - $25
Cut Down Bars - $20 Alloy / $35 Carbon


Tyres
Tubeless Setup - $25
Install tubeless tape, valve and add sealant. Install tyre

Tube or Tyre Install - $10
Tyre & Insert Install - $15
Tape, valve & sealant are not included in price


*E-bike services incur a 10% surcharge due to additional labour.

*Service pricing covers labour only. Parts and fluids charged separately unless stated.

*Excessively dirty bikes may incur an additional cleaning fee